GREEN PARKING – grass protection grid for lawns and parking areas
Green Parking is a honeycomb grid made of recycled plastic, used for the construction of grass parking areas and driveable green paths.
Its honeycomb design ensures excellent resistance to the transit of any type of vehicle, while protecting the turf. In addition, the special blend of materials makes it rot-proof and resistant to chemical agents such as fertilizers.
Green Parking is available in 3 colors: green, grey, and black, and in two versions: light and heavy. Both versions provide a permeable surface of about 90%. The light version can also be filled with gravel. Thanks to its compact size (40×40 cm), it perfectly adheres to the application surface, preventing deformation under load.
GREEN PARKING
ADVANTAGES
PROTECTS THE TURF
Green Parking is a honeycomb turf grid that provides high resistance to vehicle traffic while protecting the grass layer.
PREVENTS STAGNATION AND MUD
Once installed, the honeycomb cells are filled with quality soil and thoroughly watered. After natural settlement, they are refilled and seeded with grass. This prevents water stagnation and mud formation.
GROUND STABILITY
The stability of Green Parking depends on proper sub-base preparation, dimensioned according to soil bearing capacity.
LIGHTWEIGHT AND EASY TO INSTALL
Installation is extremely quick and easy, as each element features a special interlocking system.
RESISTANT TO WEATHER CONDITIONS
Equipped with an expansion joint capable of absorbing movements due to temperature variations. Thanks to the small element size, thermal expansion is minimal and does not damage grass roots.
RESISTANT TO VEHICLE TRAFFIC
The “Margherita” plastic insert, designed to be placed inside the Green Parking cells, makes it possible to mark parking spaces. It is also resistant to the transit of any vehicle.
Green Parking is equipped with an expansion joint that absorbs possible movements due to temperature variations. However, it is recommended to leave a 2 cm gap between the element and the perimeter edge of the surface.
Once installation is complete, the cells should be filled with quality soil, thoroughly watered, and refilled after settlement. Grass seeding can be carried out at the same time.
Use of geotextile fabric is recommended when soil is excessively draining, to avoid wash-out.
Installation is not recommended on surfaces with slopes greater than 6-7%.
Supply and installation of roadbed with quarry tout-venant, including supply, laying, and compaction, measured in place with a thickness of ... cm
Supply and installation of sand bed for leveling, thickness 2 cm.
Supply and installation of honeycomb elements Green Parking, size 40x40x4 cm.
Installation of "Margherita" inserts to mark parking spaces.
Filling of the honeycomb cells with topsoil.Grass seeding with a suitable mixture to form the turf.
Green Parking is a honeycomb grid made of recycled plastic, used for the construction of grass parking areas and driveable green paths.
Its honeycomb design ensures excellent resistance to the transit of any type of vehicle, while protecting the turf. In addition, the special blend of materials makes it rot-proof and resistant to chemical agents such as fertilizers.
Green Parking is available in 3 colors: green, grey, and black, and in two versions: light and heavy. Both versions provide a permeable surface of about 90%. The light version can also be filled with gravel. Thanks to its compact size (40×40 cm), it perfectly adheres to the application surface, preventing deformation under load.
Supply and installation of roadbed with quarry tout-venant, including supply, laying, and compaction, measured in place with a thickness of ... cm
Supply and installation of sand bed for leveling, thickness 2 cm.
Supply and installation of honeycomb elements Green Parking, size 40x40x4 cm.
Installation of "Margherita" inserts to mark parking spaces.
Filling of the honeycomb cells with topsoil.
Grass seeding with a suitable mixture to form the turf.
BIM / CAD
Un modello digitale 3D che contiene tutte le informazioni sul prodotto, le sue caratteristiche fisiche e funzionali, che viene utilizzato dalla progettazione alla manutenzione dell’opera.
Project For Building offre una libreria BIM e CAD dei suoi prodotti completa e aggiornata, a disposizione di tutti.
